Product Name: ASC24T-B9FSPS RS232<=>RS485 Converter with Enclosure, DB9F-7 RS232 Cable, and 12VDCSPS Switching Power Supply
This shopping the seller online provides a quality the best and save costs expenditures which including delivery of maintaining super (in United States Only) for ASC24T-B9FSPS RS232<=>RS485 Converter with Enclosure, DB9F-7 RS232 Cable, and 12VDCSPS Switching Power Supply. You have to read the opinion provides a lot of data about the badness and goodness of ASC24T-B9FSPS RS232<=>RS485 Converter with Enclosure, DB9F-7 RS232 Cable, and 12VDCSPS Switching Power Supply.
ASC24T-B9FSPS RS232<=>RS485 Converter with Enclosure, DB9F-7 RS232 Cable, and 12VDCSPS Switching Power Supply

ASC24T-B9FSPS RS232<=>RS485 Converter with Enclosure, DB9F-7 RS232 Cable, and 12VDCSPS Switching Power Supply
- Fast Automatic half-duplex RS232<=>RS485 2-Wire Converter
- Data Rates up to 115.2Kbps @ 4000ft, with Auto TX Enable
- Fast turn around to RX Mode eliminates timing problems
- No "data collisions," and no time delays required
- Standard and non-standard data rates OK, Automatic timing
- Any combination of Baud Rates and ComSpec is OK
- LED Indicators for RS485: Power(YEL), TXD(RED), RXD(GRN)
- 22 Ohm drive protection resistors, and ESD protection
- Wide Input Voltage Range: 8-15Vdc (Linear Regulator). 0.5W typical
- Jumpers for Bias, Termination, Test, DTE/DCE, Speed-up
- Operating Temperature Range: -40C to 85C (-40F to 185F)
- Humidity Range: 10% to 90% Relative Humidity (Non-Condensing)
- Conformal Coating Available(Call us: 513-874-4796)
ASC24T-B9FSPS RS232RS485 Converter with Enclosure, DB9F-7 Cable &
12VDCSPS Power Supply
The ASC24T is a fast Asynchronous RS232 RS485 interface converter for 2-
wire,
half-duplex applications, with a fast automatic TX enable circuit, that will
operate at data rates
up to 115.2Kbps+ @ 4000ft. The unit has jumpers for bias, termination, RS232
DTE/DCE selection, and
a setting for fast responding RS485 devices. The unit has edge mounted LED
indicators, a removable
screw terminal connector, and with
0 comments:
Post a Comment